10.2 Maintenance
After using the holder, you should wash down the exterior components with clean water to remove
dirt and residual process/cleaning solutions. Blow the wash water out of the flow manifold channels
with compressed air. Wipe the holder dry with a clean, lint-free cloth.
Tip:
The nut torque values are based on the tie rod threads being dry. You should not oil the tie
rod threads. Oiled tie rod threads will result in too much clamping pressure being applied to
the cassette.
10 Maintenance
10.2 Maintenance
Learning to Use the Kvick Lab Cassette Holder User Manual 18117269 AI
57
