4.3
Assembling the bin
Introduction
The bin is composed by four foldable walls and a locking lid. The following sections
provide instructions on how to install the bin on the dolly and assemble the bin.
Install the bin on the dolly
Before installing the bin on the dolly, make sure the caster wheels on the dolly are
locked. See
Section 4.2 Preparing the dolly, on page 14
Step
Action
1
Using two persons on opposite sides of the bin, lift the bin from the bottom.
2
Place the bin on the dolly, with the drain hole of the bin facing the window on
the dolly.
Note:
The bin can be installed on the dolly assembled and disassembled.
ReadyToProcess foldable bins Instructions for Use 29660357 AA
15
