Product User’s Manual – SK1632
5. BOARD LAYOUT
Top View of SK1632
1. PICkit pin for loading program via ICSP
User may directly use PICkit (PICkit 2 or
programmer with
to load program..
2. LCD contrast control potentiometer
5K of trimmer to adjust LCD’s contrast.
3. Reserved for 2x8 Parallel LCD
2x5 female header and Straight Pin Header is needed. This is optional to user.
4. Header pin, extension from PIC microcontroller pin
PIC Microcontroller pins extension and is reserved for header pin. User may extend SK1632
to breadboard or donut board with header pins provided.
5. Power Indicator LED
It will light ON as long as the input power is correctly connected.
6. Programmable LED Indicator
Active High output LED for PIC MCU. This LED is controllable from PIC MCU and it is
connected to RB1.
7. 28 pin IC socket
28pin IC socket for user to plug in any 28 pin PDIP PIC MCU (16-bits and 32-bits). Please
ensure the first pin is at the top right side.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
8
