CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 7 – EQUIPMENT
Date of issue: 2018-09-27
Revision No.: 22
7 - 5
7.3
Removal / Installation
7.3.1 Seats removal
(a) Remove the seats from the Velcro
(b) Unscrew the seats together with the piano hinge.
(c) Seat back is not removable.
7.3.2 Safety harnesses removal
NOTE:
Removal of safety harnesses is the same for both safety harnesses models.
Type of maintenance: line
Authorization to perform:
-
Sport pilot or higher
Tools needed:
-
wrench size 1/2 in
(a) Unscrew the nut (4, Fig. 7-4), remove the washer (5), bolt (3), the bushing (2) and
disconnect the shoulder belts bracket (1) from the attachment bracket in baggage
compartment.
(b) Remove the bolt (3), the bushing (2), and disconnect the lap belt bracket (1) from the
attachment point on the fuselage / central console side.
7.3.3 Safety harnesses installation
NOTE:
Installation of safety harnesses is the same for both safety harnesses models.
Type of maintenance: line
Authorization to perform:
-
Sport pilot or higher
Tools needed:
-
wrench size 1/2 in
(a) Gradually put the bushing (2, Fig. 7-4), lap belt bracket (1) on the bolt (3); screw the bolt
into the attachment point on the fuselage / central console side.
(b) Put the bushing (2) and shoulder belts bracket (1) on the bolt (3), insert the bolt into the
attachment bracket in baggage compartment, insert the washer (5), screw and tighten the
nut (4).