PS-28 Cruiser
PS-28N Cruiser
CR-MM-1-0-00
CHAPTER 7 – EQUIPMENT
Revision No.: 25
Date of issue: 2021-01-15
7 - 14
7.3.12 Antiglare compass shield removal
Type of maintenance: line
Authorization to perform:
See point 2.5.3.
Tools needed:
-
screwdriver
a) Open the canopy cover.
b) Loosen the screws (1, Fig. 7-9).
c) Remove the antiglare compass shield (2).
7.3.13 Antiglare compass shield installation
Type of maintenance: line
Authorization to perform:
See point 2.5.3.
Tools needed:
-
screwdriver
a) Open the canopy cover.
b) Set the antiglare compass shield (2, Fig. 7-9) under the compass.
c) Tighten up the screws (1).
1 Screw
2 Antiglare compass shield
Fig. 7-9
: Antiglare compass shield removal / installation
1
2