CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 8 – LANDING GEAR
Date of issue: 2018-09-27
Revision No.: 22
8 - 9
8.3.4 Installation of main landing gear wheel
Type of maintenance: line
Authorization to perform:
-
Sport pilot or higher
Tools needed:
-
socket wrench size 1 1/2 in
-
Allen wrench size 3/16 in
-
pliers
(a) Clear the wheel axle (2, Fig. 8-7) of impurities and apply slight layer of grease on it.
(b) Put the wheel (1) on the axle (2).
(c) Apply the securing liquid (blue Loctite 243) on the bolts threads (4) and attach with it the
wheel rim and brake disc (3).
(d) Screw and tighten the nut (5) on the wheel axle (2).
(e) Secure the nut (5) with the new cotter pin (6).
(f) Attach fairing outer bracket (7) with bolts (8) and washers (9) to the axle (2); secure bolts
with the lockwire.
(g) Install the wheel fairing (see 8.3.2).
8.3.5 Removal of nose wheel fairing
Type of maintenance: line
Authorization to perform:
-
Sport pilot or higher
Tools needed:
-
Phillips PH2 screwdriver
(a) Unscrew the bolts (3, Fig. 8-8) with the washers (7) attaching the front (1) and rear part of
the nose wheel fairing (2); remove front part (1).
(b) Unscrew the bolts (4) with the washers (7) and remove the rear part of the nose wheel
fairing (2).
