CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 8 – LANDING GEAR
Date of issue: 2011-03-08
Revision No.: -
8 - 11
8.3.7 Removal of nose landing gear wheel
Type of maintenance: line
Authorization to perform:
-
Sport pilot or higher
Tools needed:
-
wrench size 1 1/8 in
-
pliers
(a) Jack and support the airplane (see 14.2).
(b) Disassemble wheel fairing (see 8.3.6).
(c) Remove the cotter pin (6, Fig. 8-9) securing nut (4) on wheel axle (2) – on one side only.
(d) Remove the nut (4), washer and tow bracket (8) from wheel axle (2).
(e) Release the wheel axle (2) from the wheel (1), bushings (3) and the wheel fork eyes (8).
Fig. 8-9
: Nose landing gear wheel removal / installation
1 Nose landing gear
wheel
2 Wheel axle
3 Bushing
4 Nut
5 Washer
6 Cotter pin
7 Tow bracket
8 Wheel fork