CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 11 – ELECTRICAL SYSTEM
Date of issue: 2011-03-08
Revision No.: -
11 - 13
11.3.5 Position / strobe light installation
Type of maintenance: line
Authorization to perform:
-
Sports pilot or higher
Tools needed:
-
screwdriver
(a) Pass the wires (3, Fig. 11-4) through the appropriate hole in the gasket (2).
(b) Connect the position / strobe light wires (3) (see Wiring Manual).
(c) Set the position light (1) with the gasket (2) to the wing tip (5) and fasten it with screw (4).
(d) Set the
MASTER BAT
,
NAV L
, and
STROBE
switches to ON and
check the correct
function of position / strobe lights.
(e) Set the
MASTER BAT
,
NAV L
, and
STROBE
switches to OFF.
1 Position light
4
Screw
2 Gasket
For information:
3 Wires
5
Wing tip
Fig. 11-4
: Position light removal / installation