CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 11 – ELECTRICAL SYSTEM
Date of issue: 2021-01-15
Revision No.: 25
11 - 17
11.4 Check / Adjustment
11.4.1 Adjustment of Taxi / Landing light (winglet)
(a) Move the plane to the suitable position. See Fig. 11-8.
(b) Unscrew and remove the screws (2, Fig. 11-7), cover (3) and sealing (4).
(c) Gently loosen the screws (5).
(d) Install the laser perpendicular to the light plane (1).
WARNING:
WEAR LASER PROTECTIVE GLASSES.
(e) Turn on the laser.
(f) Adjust the light so that the laser beam is directed into the circle on the wall.
See Fig. 11-8.
(g) Tighten the screws (5).
(h) Turn of the laser.
(i) Remove the laser from the light.
(j) Install cover (3) with sealing (4) and screw the screws (2).
1 Taxi / Landing light
4
Sealing
2 Screw
5
Screw
3 Cover
Fig. 11-7
: Taxi / Landing light adjustment
1
2
3
4
5
