CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 12 – INSTRUMENTS AND AVIONICS
Date of issue: 2012-12-10
Revision No.: 4
12 - 33
(a) Set the
MASTER BAT
,
EMS
switches to OFF.
(b) Put a 7/64 Allen wrench into the access hole (2, Fig. 12-30) for the locking screw; engage
the screw.
(c) Turn the screw counter-clockwise until the unit disengages from the mounting rack.
CAUTION:
DO NOT PRY THE FACE-PLATE. YOU CAN DAMAGE THE UNIT.
(d) Pull gently on the sides of the unit (1) to remove it from the mounting rack (5).
(e) Disconnect the connectors (3, 4) from the unit.
1 EMS D120
4 Connector
2 Access hole of the locking screw
For information:
3 Connector
5 Mounting rack
Fig. 12-30
: EMS D120 removal / installation