CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 12 – INSTRUMENTS AND AVIONICS
Date of issue: 2021-01-15
Revision No.: 25
12 - 57
12.3.49
Installation of SV-HDX1100 display
Type of maintenance: line
Authorization to perform:
See point 2.5.3.
Tools needed:
-
5/64” hex drive tool
-
Screwdriver
NOTE:
Installation is the same for both displays.
(a) Connect the connectors (2, 3, 4, 5, Fig. 12-44) to the display (1).
(b) Slide the display (1) to the panel (7) and fasten it by means of the screws (7).
(c) Set the
MASTER BAT
,
MFD 1 / MFD 2
switches to ON and
do an operational test of the
system.