CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 2 – TIME LIMITS / MAINTENANCE CHECKS
Date of issue: 2020-11-19
Revision No.: 24
2 - 15
2B.4.6 Scheduled Special Inspection
SCHEDULED SPECIAL INSPECTION
Aircraft S/N: ………………….
TSN (OH): ………………….
Registration mark: ………………….
TSN (cycles): ………………….
Page: 1 of 1
Chpt.
Prescribed works
Made by
Checked by
10
Klassic 170/3/R propeller
Inspection after the first 25 hrs of operation
(see 10.4.2.2)
Remove the propeller spinner.
Visually check the propeller.
Tighten the fixing bolts and bolts on spokes of
the hub.
Install the propeller spinner.
Inspection after 100 hrs of operation or
12 months *
(see 10.4.2.2)
Remove the propeller spinner.
Visually check the propeller and check the grip.
Visually check the propeller hub.
Tighten the fixing bolts and bolts on spokes of
the hub.
Install the propeller spinner.
Inspection after 500 hrs of operation or
36 months*
Remove the propeller and send it to the
manufacturer/authorized service organization -
checking of propeller after 500 hrs is done at
manufacturer or his authorized service
organization.
Inspection after 1,000 hrs of operation or
72 months*
Remove the propeller and send it to the
manufacturer/authorized service organization -
checking of propeller after 1,000 hrs is done at
manufacturer or his authorized service
organization.
Sensenich 3B0R5R68C propeller
Inspection after the first 25 hrs of operation.
See the propeller manufacturer documentation -
Sensenich Three/Two Blade Composite Aircraft
Propeller Installation and Operation Instructions
for Rotax Engines.
Inspection after 1,000 hrs of operation or
12 months*
See the propeller manufacturer documentation -
Sensenich Three Blade Composite Aircraft
Propeller Installation and Operation Instructions
for Rotax Engines
Notes:
*) hrs of operation or months, whichever comes first
Date: ………………….
Signature: ………………….
