PS-28 Cruiser
PS-28N Cruiser
CR-MM-1-0-00
CHAPTER 9 – FUEL SYSTEM
Revision No.: 3
Date of issue: 2012-05-28
9 - 8
fuel system and eliminates all mechanical impurities. The electrical fuel pump (6) is located on
the firewall above the gascolator.
1 Fuel tank, left
5 Gascolator
2 Fuel tank, right
6 Electrical fuel pump
3 Finger screen
7 Mechanical fuel pump
4 Fuel selector valve
Fig. 9-3
: Fuel system installation diagram
9.2.3 Indication of fuel quantity and pressure
Fuel quantity is measured by the fuel float sensor (see Fig. 9-4). The float position is converted
to an electrical signal and fuel quantity in the tank is indicated either on the EMS or on the
classical analog instruments (see Fig. 9-1).
Fuel pressure is measured by the electrical fuel pressure sensor. Electrical signal from the
sensor is indicated either on the EMS or on the classical analog instruments (see Fig. 9-1).
