PS-28 Cruiser
PS-28N Cruiser
CR-MM-1-0-00
CHAPTER 10 – POWERPLANT
Revision No.: 24
Date of issue: 2020-11-19
10 - 14
1 Engine
3 Washer
2 Bolt
4 Engine mount
Fig. 10-8
: Engine removal / installation
10.3.2 Installation of the engine on the airplane
Type of maintenance: heavy
Authorization to perform:
See point 2.5.3.
Tools needed:
-
wrench size No.8, No.9, 3/8”, 7/16”, 9/16”
-
Allen wrench size No.4
-
screwdriver
-
cutting pliers, pliers
-
Cobra pliers (for clamps)
(a) Put the engine (1, Fig. 10-8) on the engine mount (4) by the crane or with 2 assistants and
attach it by the bolts (2) with washers (3). Tighten up to a torque of 40 Nm (354
inch lb)
.
(b) Secure the bolt heads (2) by lockwire (see 15.8.2).
(c) Install the exhaust system (see 10.3.12).
