Mounting AXU-ACT8 (only for ACTION-8A enclosures)
24
Introduction
The
AXU-ACT8
are designed for enclosures
ACTION-8
,
ACTION-8A-230
and
ACTION-8A-115
.
Safety Precautions
Wall plugs provided are to be used in brick walls only.
For other wall materials, source the suitable wall plug
before use.
DAS Audio
is not responsible for use other than the
recommended or whether it be the result of insufficient
strength of the support structure. Use only the screws
and wall plugs supplied on surfaces that will provide
sufficient support. Do not use on surfaces such as plaster,
and gypsum. It is highly recommended and in most parts
of the world mandatory, that a safety cable be used to
secure the enclosure to the structure.
To ensure optimum safety, the installation should be
checked thoroughly at regular intervals replacing all
deteriorated elements.
Loosen the screws before reorienting the speaker.
Never force the rigging elements.
Contact a licensed rigger if there is any doubt.
Mounting instructions
You can consult the
AXU-ACT8
mounting instructions for
ACTION-8A
on the web: www.dasaudio.com
Manual del Usuario
/ action series /
User’s Manual