2
5
8
14
3
6
4
7
1
4
Front panel description
[1]-
LCD Screen: Shows, by default, the
name of the last recalled memory on the
bottom line of the screen, and the current
routing on the top line. Also used to show
all parameters as they are edited, and all
menu selections.
Control Keys: Selection and adjustment of parameters.
NEXT key moves forward through list of parameters.
BACK key moves backwards through list of parameters.
MENU key activates the main menu – a second press selects the last menu edited – a
third press selects the last menu item. In this way, three presses on MENU from the default
screen will jump back to the last parameter adjusted. Selection of different menus is
accomplished using the BACK and NEXT keys, or with the FREQ encoder.
key enters the chosen menu, confirms selections, and changes filter
types when editing parametric sections.
will flatten the currently selected parametric sections. Note that, for
safety reasons, it is not possible to bypass the high and low pass filter sections.
exits menus back to the default screen.
[2]-
[3]-
[4]-
[5]-ENTER
[6]-BYPASS
[7]-QUIT
[8]-
Rotary Encoders: Three velocity sensitive encoders adjust the relevant
parameters as displayed on the screen.
Input Sections: Control and monitor input signal paths.
Red
MUTE buttons illuminate when pressed and mute audio for
that channel.
EDIT buttons illuminate yellow when pressed, and access gain on first
press, then last viewed parameter on second press, then exit on third press.
[9]-
[10]-
[11]-
Input meters show dB from clipping point of the analogue to digital converters. Yellow (0dB) LED
illuminates 3dB from clipping. Red CLIP LED may illuminate independently from the rest of the meter to
show digital overflow. All four CLIP LEDs illuminating indicates internal clipping after the ADC.
[13]-
[14]-
‘L+4’,
EDIT buttons illuminate yellow when pressed, and access gain on first press, then last viewed
parameter on second press, then exit on third press.
Output meters show dB from limiting. The yellow LED illuminates at the onset of limiting. The
red LED illuminates at 4dB,
into limiting (i.e. 4dB of gain reduction).
Output Sections: Control and
monitor output signal paths.
Red
MUTE buttons illuminate
when pressed and mute audio for
that channel.
[12]-
13
12
11
10
9
DSP-2040
User’s Manual
Summary of Contents for DSP-2040
Page 6: ...DSP 2040 User s Manual...
