Enable the Wireless Audio
option in your smart phone
or tablet and select the
Vantec cabinet. Once this is
done a message indicating
the name of the connected
device will appear in the
status link.
When establishing the link a
“ b e e p ” s o u n d w i l l b e
reproduced by the speaker
system.
When selecting Master L
mode, next step is configuring
the Slave cabinet.
Go to the other cabinet and
configure it in Slave R mode:
After having created the link
between the Master and the Slave
Cabinets, configure Master with the
tablet, smart phone etc creating the
new link:
CREATE NEW LINK
CREATE NEW LINK
WIRELESS AUDIO
WIRELESS AUDIO
CREATE NEW LINK
CREATE NEW LINK
CREATE NEW LINK
CREATE NEW LINK
CREATE NEW LINK
CREATE NEW LINK
CREATE NEW LINK
CREATE NEW LINK
Select Mode:
Connect from your
LINKED: das audio iPAD
Connect from your
device to:
CREATE NEW LINK
connected to:
device to:
VANTEC-12A -025A53
BACK
DAS iPad
VANTEC-12A -025A53
Select Mode:
Select Mode:
Configure SLAVE unit
Waiting MASTER
Searching for
in SLAVE: R mode
connection
LINK DONE!!
Slave Units
Select Mode:
SINGLE: L+R >
< MASTER: L >
< MASTER: L >
CONTINUE
CONTINUE
---- Wait a minute ----
---- Wait a minute ----
< SLAVE: R >
SINGLE Mode
Master & Slave
Note:
Always be sure that the distance between devices does not exceed
20meters.
Check as well that there is direct visual contact between the units.
This means that objects, as walls may cause interruption in the
transmission.
When establishing the link between Master & Slave cabinets,
switch off all the other devices.
It can take up to 1 minute to create the link.
master cabinet
slave cabinet
slave cabinet
master cabinet
master&slave cabinet
master cabinet
master cabinet
master cabinet
press
1
1
3
4
4,1
5
6
7
2
2
3
4
OPTIONS:
In this sub-menu the user can configure all the non-audio related options. Remember that in order to access each
parameter it is necessary to push the encoder:
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
BACK
BACK
BACK
BACK
BACK
BACK
BRIGHT: 0
BRIGHT: 0
BRIGHT: 0
CONTRAST: 0
CONTRAST: 0
CONTRAST: 0
BRIGHT:
0
BRIGHT:
+10
CONTRAST:
-10
CONTRAST:
+10
BRIGHT:
0
CONTRAST:
0
By increasing the
contrast the
screen can be
easily seen from
lower positions.
21
Manual del Usuario
/ vantec series /
User’s Manual
