INTRODUCTION
Features
The
vantec series
inherits the exceptional sound quality and rugged build that have made DAS
professional systems an internacional sound reinforcement standard. Designed from “real-world” experience,
they offer users outstanding performance, absolute reliability, and unparalleled convenience. Whether it is in a
high-profile venue or on the stage of a major event, the
vantec series
will provide the power and definition
needed to make your performance a success.
6
VANTEC-15A
- Two-way powered system.
- 15” bass loudspeaker.
- Compression driver with titanium diaphragm.
- Symmetric enclosure design for stage monitor use.
- Built-in rigging points (eyebolt based).
- Stand mountable.
The
VANTEC-15A
is a powered loudspeaker (2 channel Class
D amplifier), that utilizes a 15” low frequency transducer and a
1” exit compression driver. The multi-angle cabinet is
constructed of Birch plywood protected by an environmentally
friendly black paint finish. Two bar handles and a steel grille are
provided. A 35mm tripod socket allows for stand mounting with
two possible angles 0º or -10º.
VANTEC-12A
- Two-way powered system.
- 12” bass loudspeaker.
- Compression driver with titanium diaphragm.
- Symmetric enclosure design for stage monitor use.
- Built-in rigging points (eyebolt based).
- Stand mountable / Dual angle.
The
VANTEC-12A
is a powered loudspeaker (2 channel Class
D amplifier), that utilizes a 12” low frequency transducer and a
1” exit compression driver. The multi-angle cabinet is
constructed of Birch plywood protected by an environmentally
friendly black paint finish. Two bar handles and a steel grille are
provided. A 35mm tripod socket allows for stand mounting with
two possible angles 0º or -10º.
VANTEC-215A
- 3-way powered system
- 2 x 15" bass loudspeaker working in a “dual band”
configuration (2.5 ways)
- Compression driver with titanium diaphragm
- Two steel-reinforced handles
The
VANTEC-215A
is a powered loudspeaker (3 channel
Class D amplifier), that utilizes two 15” bass loudspeakers for
extra low frequency punch and higher SPL in a “dual band”
configuration where each speaker works in a specific frequency
range. High frequencies are handled by a 1”exit compression
driver with titanium diaphragm. The trapezoidal cabinet is
constructed using Birch plywood and protected with a hard-
wearing black paint finish. Two bar handles and a steel grille
sealed against corrosion using a polyamide powder coat finish
are provided. Rigging points provide a safe and simple way to
fly the
VANTEC-215A
cabinets.
Manual del Usuario
/ vantec series /
User’s Manual
