20
4.
HEMC to HAPTISYNC HUB UPGRADE
Haptic systems controlled by a HEMC can upgraded with the new HaptiSync Hub.
4.1
HEMC with KAI-1P controller(s) upgrade
For haptic systems using KAI-1P controllers, a KCA or KCA-T unit (see the red dotted below) must
be added inside each seat. A KCA-T (T for termination) is required only for the last seat on the
chain. For a multiple seat configuration, the seats must be connected in daisy chain when using
the HaptiSync Hub:
.
HEMC Setup
HaptiSync Hub Setup