background image

- 13 - 

parameters of the treadmill. When the treadmill is running, they are used to adjust 
the  incline  for  1  grade/time;  after  holding  for  more  than  2s,  automatic  continuous 
increasing or reducing will be realized.   

There are fast keys on the handrail. 

  Incline  shortcut  keys:    Incline  can  be  directly  adjusted  to  grade 

3,  6,  9,  12

  by 

incline shortcut keys when the treadmill is running.   

1.6 

Data display range of various parameters:   

TIME:                0:00 

– 99.59(MIN) 

DISTANCE:    0.00 

– 99.9(KM) 

CALORIES:    0.0 

– 999 (KCAL) 

SPEED:           

1.0 

– 16.0(

KM/H) 

PULSE:            50 

– 200 (BPM) 

INCLINE:       

– 15

1.7. Heart Rate Display 

While the treadmill is connected to the power, hold the pulse tester for 5s and the heart rate 
value will be displayed. The initial value is the actually measured heart rate, and its display 
range  is:  50-200  times/  minutes.  In  the  heartbeat  measurement  process,  there  will  be  a 
heart shaped icon flashing.   

Heart rate displayed is for reference only and can not be used as medical data.   

1.8. Manual Modes 

1.8.1. How to enter Manual Mode: 

A.  Switch on the power supply; then, directly enter normal mode under the manual 

mode.

 

B.  In  stop  state,  press  MODE  to  select  Normal  mode,  Time  Countdown,  Calorie 

Countdown and Distance Countdown modes under the manual mode.

 

1.8.2. Setting functions under Manual Mode: Time, Distance and Calorie Setting 

A.  When entering the manual mode, the time is displayed as 0:00; 

 

B.  In  manual  mode,  press  MODE  to  enter 

Time  Countdown  mode

;  the  time 

window will display the time and flicker; the initial time  is 30:00; set countdown 
time  by  SPEED  +/  SPEED  -  and  INCLINE  +/  INCLINE  -.  Time  setting  range: 
5:00-99:00; each time of increase/ decrease will be 1: 00.

 

C.  In  time  countdown  mode,  press  MODE  to  enter 

Distance  Countdown  mode

the initial distance will be displayed as 1.00 km; set the distance by SPEED +/ 
SPEED - and I/ INCLINE - in the range of 1.0-99.0 km/mi; each time of 
increase/ decrease will be 1 km. 

 

D.  In distance countdown mode, press MODE to enter 

Calorie Countdown mode

the  initial  distance  will  be  displayed  as  50.0kcal;  set  the  calorie  by  SPEED  +/ 
SPEED - and I/ INCLINE - in the range of 20.0-990.0 kcal; each time of 
increase/ decrease will be 10.0 kcal. 

 

Summary of Contents for AF-781





























Reviews: