16
proceed to next periods. The setting will be automatically saved, and accidents such as a power outage will not remove
the setting.
2
、
Customization selection and start
Pressing
“
”
button repeatedly until U1, U2 and U3, then users can set time duration and press
“
start
”
.
E.
Parameter setting in the countdown models
The default time countdown setting starts with 30:00 min, ranging from 5 min to 90 min with a 1 min interval.
The default calories countdown starts with 50 calories, ranging from 20 to 990 with a 10 calories interval.
The default distance countdown starts with 1 km, ranging from 1 to 99 km with a 1 km interval.
The sequence is manual, time, distance and calories.
F.
Others
1
、
When the countdown model expires, the screen will display “END” and keep sounding warning signals till the treadmill
comes to a complete stop. Then it will return to manual model.
2
、
When setting parameters, adding a value beyond the set range will automatically recycle to other end. E.g.: pressing
“
”when it is already 99 min will automatically jump back to 5 min. User can use “
”
、
“
” to adjust.
3
、
Users can only count-down one of the time, calories and distance setting; the rest two will be displayed in an incremental
manner.
4
、
The calories consumption is based on a 70.3 kcal/km standard.
5
、
Speed acceleration and deceleration interval is 0.5 km/s
6
、
MP3 audio output could be amplified when accessed properly from the side.
7
、
KM/Miles Switch. Pulling off safe lock and pressing P and M button simultaneously for 3 seconds, users shall hear a
“beep” and the screen will display the maximum speed for both units.
8
、
If not set, the value will automatically amass till maximum and restart again; in manual model, when time exceeding 99:59
the treadmill will automatically power down.
