22
distance normally. And the gap between the right and left distance should be no more than 5mm.
● If the belts off the track to the left side, please screw the left adjusting bolt clockwise slowly, noticing the change of
the deviating distance, until center the belt. (Attention: the space between the belt and the right/left edgings is at a
distance normally. And the gap between the right and left distance should be no more than 5mm.
Picture A:
If the belt has drifted to the RIGHT
Picture B:
If the belt has drifted to the LEFT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR
SERVICING THE UNIT.
CLEANING
General cleaning or the unit will greatly prolong the treadmill. Keep treadmill clean by dusting regularly. Be sure to
clean the exposed part of the deck on either side of the walking belt and also the side rails. This reduces the build up
of foreign material underneath the walking belt.
The top of the belt may be cleaned with a wet, soapy cloth. Be careful to keep liquid away from inside the motorized
treadmill frame or from underneath the belt.
Warning
：
Always unplug the treadmill from the electrical outlet
before removing the motor cover.
At least once a year remove the motor cover and vacuum under the motor
cover.
WALKING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may
play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend a
periodic inspection of the deck.
We recommend lubrication of the deck according to the following timetable:
➢
Light user (less than 3 hours/ week) annually
➢
Medium user (3-5 hours/ week) every six months
➢
Heavy user (more
than 5 hours/ week) every three
months
PIC A
PIC B
