4
Straight Cut
Insert the siding between the
cutting blade and the base , pull
out the extension bracket, then
flush the siding with the guide
bar on one side of the rollers,
hold the siding and pull handle
down to complete a cut.
Note:
the flat side of the blade
should face the working table.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Changing the Blade
Use provided Allen wrench to
remove the five screws, then
carefully move the blade out of
the small blade holder.
Note:
the flat side of the blade
should face the working table.
Warning:
Do not put your
fingers against the sharp edge of
the blade at any time.
Transportation
Folding 4 legs as shown and
use the lock pins firmly
locked the cutting head,
then carry the handle as
shown.
