15
Version 1.0
If you want to stop the manual dose tap the ‘Start’ button (that will now be displaying ‘Stop’) again to
cancel the operation. There is a lag when pressing the stop button so this should not be used as a
method to stop the pump at an exact point. For accurate additions program the amount required and
let the pump complete its program.
Calibration
When the Dosing pump is initially set up, pump heads have been replaced, or if the unit has been in
service for a period of time it is worth calibrating pump heads to ensure accuracy.
To calibrate open the app and select the device you want to calibrate from the available devices list.
Tap the ‘Settings’ icon located at the bottom right of the ‘Plan’ page.
Select ‘Flow Calibration’ from the list and then choose the pump head to calibrate.
Make sure the inlet hose for the pump is submerged and that the outlet hose is directed into a
suitable collection container.
Tap on ‘Start Emptying’ to prime the pump head and hose. Once all air has been expelled and the line
is fully primed tap ‘Emptying, click to stop’.
Move the outlet hose into a suitable measuring cylinder.
w
w
w
.th
ea
qu
ari
um
so
lu
tio
n.c
om
