5
Version 1.0
Connecting the pump to the Kamoer Remote app
Make sure your mobile device is connected to your home network, the location services on the
mobile device are enabled and that the Kamoer Remote app permissions are set correctly from your
mobile devices’ settings page.
Please note the device does not support 5G Wi-Fi and cannot use a 5G Wi-Fi hotspot. If your internet
supplier’s router is running a mixed mode 2.4ghz/5ghz Wi-Fi network please check their online
instructions, website or support forum to de-synchronise the bands into two separate 2.4 and 5ghz
networks before attempting to connect the pump.
Connect the power supply to the DC socket on the back of the pump and plug in to a mains power
source.
Open the App, click the ‘+’ button in the upper right corner to add the device.
Under the Kamoer heading select ‘FX-STP 2’and confirm that your mobile device is connected to the
Wi-Fi network.
Enter you 2.4G Wi-Fi network password and then when prompted tap next.
On the front of the FX-STP pump turn the control dial to the left or right to bring up the menu,
continue to turn the dial until ‘WiFi’ is highlighted. Press the control dial to select. The display should
now display the ‘Network’ option, turn the dial to select and then press to confirm.
w
w
w
.th
ea
qu
ari
um
so
lu
tio
n.c
om
