6
Version 1.0
The screen will display ‘Setting…’ to show it is ready to connect, in the app tap on the blue bar at the
bottom of the screen to initiate the connection.
After the connection is successful, the app will confirm the successful connection and the display on
the pump will return to the Wi-Fi settings menu.
At this point the dosing pump is connected to the cloud and the dosing program can be set via the
app.
Programming the pump
To program the pump, open the Kamoer Remote app and select the device you want to program from
the available devices list.
With the device selected the manual page will be displayed.
From this the flow rate of the pump can be set by tapping on the flow setting number and entering
the desired flow rate or by moving your finger along the flow curve above the number.
When the desired flow rate has been selected tap on the start button and the pump will begin to run.
Operation can be stopped by tapping this button again.
The flow rate can be adjusted without stopping the pump by
tapping on the flow setting number and
entering the new flow rate or by moving your finger along the flow curve above the number.
When changing the flow rate in the app the LCD on the pump will automatically update to show the
new setting.
The manual page in the app will also display the rotation speed of the pump head and the tube time.
The tube time can be set to indicate when the Pharmed tube will need replacing.
w
w
w
.th
ea
qu
ari
um
so
lu
tio
n.c
om
