TITLE
OPERATOR MANUAL
PAGE
PRINTERS
ARTRIX H8
13
VERSION
2017SEP01/1
OUT OF
REVISED BY
MUNOZ, ANTONIO
support@dgen.com
77
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
1
Left side cover.
Used only for servicing the printer. Only d∙gen qualified technicians can have access to this part of
the printer.
2
Feeding servo motor.
Moves the conveyor forward or backwards. To be serviced only by a d∙gen qualified technician.
3
Inductive motor and reducer.
To turn the brush roller when cleaning the conveyor. To be serviced only by a d∙gen qualified
technician.
4
Electric cabinet.
Equipped with high voltage electric components such us breakers, servo driver units and inverters.
To be serviced only by a d∙gen qualified technician.
5
Electric cabinet’s main ON/OFF switch.
Equipped with a 3-phase interrupter. Used when servicing the printer or when leaving it stopped for
a long period of time.
6
32A 3-phase power supply inlet.
To be connected to the site’s
power supply socket. 3Ø+N+PE AC 380 V (32A).
7
Feeding unit.
This unit moves sideways depending on the signal received by the EPC sensor to always keep the
media well aligned with the conveyor.
8
Dancing bar.
For applying tension on the fabric. Used only in combination with the motor type feeder when
printing on non-knitted/non-elastic fabrics.
9
Banana bar.
The purpose of this bar is to homogenize the tension in the fabric. Specially used when printing on
knitted/elastic medias. Also on fabrics with a lower tension in the edges. Possible to regulate the angle
of the bar by turning the wheel. If the tension in the edges are very uneven, it is possible to adjust the
bending angle of the bar manually.
10
Emergency push switch button.
This printer has a total of 4 emergency buttons. 2 more at the front.
11
Extender roller.
Rotated by an inductive motor with reducer. Can be switched ON/OFF in the touch panel. Normally
used when printing on knitted/elastic fabrics.
Summary of Contents for Artrix H8
Page 1: ...OPERATOR MANUAL ...