TITLE
OPERATOR MANUAL
PAGE
PRINTERS
TELEIOS GRANDE G5
6
VERSION
2017DEC04
OUT OF
REVISED BY
MUNOZ, ANTONIO
support@dgen.com
66
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
9
Main ON/OFF switch.
This 3-phase main switch isolates the printer from the main grid when in the OFF position.
10
Front electric cabinet.
Contains high voltage electric devices, electronic boards and servo driver units only to be serviced by
a d.gen qualified technician.
11
Waste ink drain bottle.
Make sure is right under its funnel to avoid spilling ink on the floor. The level of ink requires to be
checked daily and every time before purging the print heads.
12
Take-up unit.
The take-up unit box contains a powder clutch to control the output torque and a hydraulic piston to
raise or lower the upper rubber roller automatically.
13
Take-up rollers.
The take-up unit is composed by 2 rubber rollers. The lower roller is fixed, while the upper one can be
raised either manually (levers) or mechanically with the pneumatic system (touch panel).
14
Feeder roller number 2.
This feeder roller is directly connected to a second servo motor. Pulls the media down to the take-up
unit.
15
Front dryer.
2 types of dryer is provided with the printer.
The old type dryer is equipped with 6 infrared halogen lamps to dry the media, and a set of DC
brushless fans to suck out the fumes generated in the drying process.
The new type dryer is equipped with 6 cross-flow blowers and a heating element right under every
blower. As well as 2 sheath heaters for extra drying when printing darker colors.
16
Take-up roller’s lever.
To lower or raise the upper rubber roller manually when installing the media.
Summary of Contents for Teleios Grande G5
Page 1: ...OPERATOR MANUAL ...