GVL 8408-M-UL
GVL 8408-M-UL
English
English
99.828.04 1.0/06/19
99.828.04 1.0/06/19
10/12
11/12
Usable window drives by D+H Mechatronic AG
Technical Data
Type
GVL 8408-M-UL
Rated voltage
115 V AC ± 10%, 60 Hz
Rated power
388 VA
Stand-by operating
ca. 2.5 W
Protection class
I
Temperature range
-5 ... +40 °C (23...104°F)
Ingress protection
IP 30
Class of rating
short-time duty, 20%
Output voltage
24 V DC / residual ripple 10%
<
Safe output: *
Running current of drives
6.4 A
Rated current of drives
8 A
Housing
plastic
colour of housing
white
Housing dimensions
12.1'' x 12.1'' x 3.9''
310 x 310 x 100 mm
* Please observe:
The
output current of the groups
1 ... 5 amounts
max. 4 A
.
The
total output current
of the control panel, is limited
up to 8 A
.
Electrical devices, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose electrical devices into household waste!
Disposal
To avoid accidents always disconnect the ventilation
control from the power supply before cleaning or
performing any maintenance.Inspection and
maintenance has to be carried out according to
D+H maintenance notes. Only original D+H spare
parts may be used. Repair is to be carried out
exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
Maintenance and cleaning
Mounting of drive:
Because of varied possiblilties for choosing drives,
Please take mounting informations from relevant
instructions for use of the respective drive.
Moving direction of drives:
Change poles of wires of the drive supply
(„Mot.a" and „Mot.b"), when moving direction is wrong.
Window drives (Accessories)
The control unit may only be operated with the following drives of which representative samples of the
product series as specified on the respective certificate were tested according to the current UL
requirements:
Series: VCD
Certificate Number 20150923-E222052
Models VCD 22/yyy, VCD 22/yyy-BSY, VCD 22/yyy-BSY+, MA 25 N-V2, VCD 204/yyy, VCD 203/yyy, and
ZEL MA 25 G3/yyy.
Note: where yyy represents the stroke length up to 350 mm, MA 25 N-V2 UL with a stroke of 250 mm.
Series: CDC
Certificate Number 20170207-E222052
Models CDC-0252-0350-1-ACB, CDC-0252-0500-1-ACB, CDC-0252-0600-1-ACB, CDC-0252-0800-1-
ACB, CDC-0252-1000-1-ACB, CDC-TW-0502-0350-1-ACB, CDC-TW-0502-0500-1-ACB, CDC-TW-0502-
0600-1-ACB, CDC-TW-0502-0800-1-ACB, CDC-TW-0502-1000-1-ACB, may be followed by several digits
refering to optional data signals and connections configurations.
Series: KA
Certificate Number 20150923-E222052
Models KA, followed by -TW or Blank, followed by 16, 34, 54, 66, or 106, followed by “/”, followed by yyyy,
followed by Blank or -BSY+, may be followed by -SA, -SZ, -SGI or any alternate digits, where yyyy
represents the stroke length in millimeters, from 0100 to a maximum of 1500
Series: CDP
Certificate Number 20150923-E222052
Models CDP 800/yyyy-BSY+, CDP 1000/yyyy-BSY+, CDP 1500/yyyy-BSY+, CDP-TW 1600/yyyy-BSY+,
CDP-TW 2000/yyyy-BSY+, CDP-TW 3000/yyyy-BSY+,, may be followed by several digits refering to
optional data signals and connections configurations, with "yyyy" three of four digits for length of stroke
from 600 to 1500 mm
Series: LDx/VLD
Certificate Number 20160629-E222052
Models LDE or LDCO 1000/yyy, LDF 100/yyy, LDS 100/yyy, LDH 800/yyy,
and linear drive for locking and unlocking motor-operated window models VLD 51/yyy-BSY+, VLD 51/yyy.
May be followed by various other suffixes.
Series: ZA/DXD-BSY
Certificate Number 20150923-E222052
Models ZA 35/yyyy-BSY+, ZA 85/yyyy-BSY+, ZA 105/yyyy-BSY+, ZA 155/yyyy-BSY+, may be followed by
„-HS”, SXD 800/yyyy-BSY+, SXD 1000/yyyy-BSY+, SXD 1500/yyyy-BSY+;
Double motor - Models DXD 150/yyyy-BSY+, DXD 300/yyyy-BSY+, may be followed by „-HS”, may be
followed by various other suffixes.
Louver operator drive - Models LA 35/yyyy-BSY+, LA 85/yyyy-BSY+, LA 105/yyyy-BSY+, LA 155/yyyy-
BSY+, may be followed by various other suffixes
Note: yyyy defines the stroke length in millimeters
Series: ZA-PLP
Certificate Number 20180207-E222052
Models ZA 35/yyyy, ZA 85/yyyy, ZA 105/yyyy, ZA 155/yyyy, ZA-0300-yyyy-1-PLP, ZA-0800-yyyy-1-PLP,
ZA-1000-yyyy-1-PLP, ZA-1500-yyyy-1-PLP,
Louver operator drive - Models LA 35/yyyy, LA 85/yyyy, LA 105/yyyy, LA 155/yyyy, LA-0300-yyyy-1-PLP,
LA-0800-yyyy-1-PLP, LA-1000-yyyy-1-PLP, LA-1500-yyyy-1-PLP. May be followed by various other
suffixes. May be followed by ,–HS”, may be followed by various other suffixes.
Note: yyyy defines the stroke length in millimeters.
