99.824.43 1.4/04/16
5/16
English
SHD 54/450-V /-BSY+
SHD 54/450-V /-BSY+
SHD 54/450-V
for sash dimension up to (WxH): 1,2 x 1 m
SHD 54/450-BSY+
for sash dimension up to (WxH): 1,2 x 2 m
The example is just a recommendation
Mounting informations
Intended use
- Chain drive for electric opening and closing of
side hung sashes up to 65°
- Operating voltage 24 V DC
- Useable for smoke ventilation, D+H Euro-SHEV
according to DIN EN 12101-2 as well as daily
natural ventilation
Drive unit with 2,5 m silicon-cable,
mounting template and bracket set.
Extent of supply
Safety extra low voltage 24 V DC!
Do not connect directly to the mains supply!
- Connection has to be carried out only by an
authorized electrical specialist
- Danger of violent pressure in handaccessible area
- Keep away people from the operating area of
the drive
- Keep away children from the control
- Use only in dry rooms
- Only for inside mounting
Use rain detector with danger of rain
- Just use unchanged original D+H parts
Observe enclosed red safety slip!
Safety notes
Performance features
- Microprocessor controlled synchro electronics
BSY+ for a precise synchronous run
- Individually programmable via software SCS
- Electronic limit stop and overload cutoff
- Power supply possible from left or right
- Locking relief after closing
Example for application
2 x SHD 54/450-BSY+ and FRA 11-BSY+
(loking bar drive optional)
86,5
60
100
102
Space required
Technical data
Type
SHD 54/450-V /-BSY+
Observe double current consumption for the „-BSY+ Set“ version!
Rated voltage
24 VDC, ± 15%; 1A
Performance
24 VA
Push/ pull force
500 N + ca. 20 % switch-off reserve (temporary)
Clamping force
ca. 250 N
Runtime-OPEN
ca. 12 mm/s
Runtime-CLOSED
ca. 12mm/s
Lifetime
>20 000 double strokes
Duty cycle
30 % (With cycle time 10 min.)
Fire stability
30 min. / 300°C
Housing
Aluminium powder-coated (~RAL 9006)
Ingress protection
IP 50
Temp. range
-5 ... +75°C
Emission sound pressure level
LpA ≤ 70 dB(A)
Electrical devices, accessories, batteries and packa-
ging should be sorted for environmental-friendly
recycling. Do not dispose electrical devices and
batteries into household waste!
Only for EC countries:
According the European Guideline 2012/19/EU for
waste electrical and electronic equipment and its
implementation into national right, electrcal devices
that are no longer usable must be collected separa-
tely and disposed of in an environmentally correct
manner.
Disposal
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following directives:
2014/30/EU, 2014/35/EU
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Dirk Dingfelder
Maik Schmees
Member of the Board
Authorized signatory, Technical Director
31.03.2016
Maintenance and cleaning
Maintenance work is only allowed when the device is in
a de-energized condition! Inspection and maintenance
has to be carried out according to D+H maintenance
notes. Only original D+H spare parts may be used.
Repair is to be carried out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
Guarantee
You will get 2 years guarantee for all D+H products
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by an
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
