background image

1

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3 or later.

5V 2.5A DC Power Adapter

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and

specifications subject to change without notice. DWL-7000AP. 06192003

Before You Begin

Check Your Package Contents

DWL-7000AP Wireless Access Point

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight-Through) Cable

If any of the above items are missing, please contact your reseller.

The default IP address for the DWL-7000AP is 

192.168.0.50

 with a Subnet Mask of

255.255.255.0

. You will need to assign your computer a Static IP address within the

same range as the DWL-7000AP’s IP address for the purpose of configuring the DWL-
7000AP. 

See the Manual on the CD-ROM if you need assistance in assigning a

Static IP address for your network adapter.

        Using a power supply
        with a different voltage
rating will damage and void
the warranty of this product.

DWL-7000AP

D-Link  AirXpert

TM

Tri-mode Dualband Wireless

Access Point

Summary of Contents for 7000AP - Air Xpert - Wireless Access Point









Reviews: