DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
104
Parameter
Description
To change or delete the schedule, click the
Edit schedule
button
( )
. In the opened window, change the parameters and click the
SAVE
button or click the
DELETE FROM SCHEDULE
button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the button in the
line of the network.
Clients isolation
Move the switch to the right to forbid wireless clients of this
wireless network to communicate to each other.
Enable guest network
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
additional network to be isolated from the devices and resources of
the router's LAN.
In the
Security Settings
section, you can change security settings of the wireless network.
By default, the
WPA2-PSK
network authentication type of the wireless network is specified. WPS
PIN from the barcode label is used as the network key.
Figure 94. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type
Description
Open
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n or 802.11ac devices).
WEP
Authentication with a shared key with WEP encryption. This
authentication type is not available when a mode supporting
802.11n or 802.11ac devices is selected from the
Wireless mode
drop-down list on the
Settings / Wireless Network
page.
WPA
WPA-based authentication using a RADIUS server.
WPA-PSK
WPA-based authentication using a PSK.
WPA2
WPA2-based authentication using a RADIUS server.