D-Link AC3200 Ultra User Manual Download

Page: 209 / 242

204

D-Link DIR-890L User Manual

Section 8 - Troubleshooting

• Configure your Internet settings:

• Go to

Start

Settings

Control Panel

. Double-click the

Internet Options

Icon. From the

Security

tab, click the button to restore the settings

to their defaults.

• Click the

Connection

tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked.

Click

• Go to the

Advanced

tab and click the button to restore these settings to their defaults. Click

three times.

• Close your web browser (if open) and open it.

• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the

• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing

the configuration. If you have multiple computers, try connecting using a different computer.

What can I do if I forgot my password?

If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.

To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button

down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default

IP address is

192.168.0.1

. When logging in, leave the password box empty.

Summary of Contents for AC3200 Ultra



















































































































































































































































Search results

Summary of Contents for AC3200 Ultra

Reviews:

Related manuals for AC3200 Ultra

Brands by name

Popular brands

D-Link AC3200 Ultra, User Manual

Search results

Summary of Contents for AC3200 Ultra

Reviews:

Related manuals for AC3200 Ultra

Brands by name

Popular brands