D-Link AC3200 Ultra User Manual Download

Page: 28 / 242

D-Link DIR-890L User Manual

Section 3 - Installation - Access Point

Installation - Access Point

• Configure the DIR-890L with the computer that was last connected directly to your Internet connection. Verify that it is connected to the

Internet before connecting additional devices.

• If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take

a picture of your existing setup before making any changes.

• If you are using this device to extend the range of your existing wireless network, you may need to use trial and error to determine an

acceptable placement location.

Before you Begin

This section will walk you through the installation of the DIR-890L as an access point. The DIR-890L is configured by default to operate in Router

Mode. It is recommended to perform a hardware reset and disconnect it from your network before proceeding.

Summary of Contents for AC3200 Ultra



















































































































































































































































Search results

Summary of Contents for AC3200 Ultra

Reviews:

Related manuals for AC3200 Ultra

Brands by name

Popular brands

D-Link AC3200 Ultra, User Manual

Search results

Summary of Contents for AC3200 Ultra

Reviews:

Related manuals for AC3200 Ultra

Brands by name

Popular brands