87
D-Link DIR-890L User Manual
Section 4 - Configuration - Router Mode
DIR-890L HW:A1
FW:1.10
Time
Your router’s internal clock is used for data logging and schedules for features. The date and time can be
synchronized with a public time server on the Internet, or set manually.
Settings
Features
Home
Management
Management >> System Time
Save
Schedule
Time Zone:
(GMT-05:00) Eastern Time (US & Canada)
⌵
Time:
2016/08/07 07:34:06 PM
Enable Daylight Saving:
Disabled
Time Configuration
Automatic Time Configuration
Update Time Using an NTP Server:
Enabled
NTP Server:
D-Link NTP Server
D-Link NTP Server
⌵
COPYRIGHT © 2016 D-Link
Automatic Time Configuration
Manual Time Configuration
Update Time Using an NTP Server:
Disabled
Date:
2016
⌵
08
⌵
10
⌵
(Year/Month/Day)
Time:
10
⌵
28
⌵
(Hour/Minute)
Management
Time & Schedule
Time
The Time page allows you to configure, update, and maintain the correct time on the internal
system clock. From here you can set the time zone, the Network Time Protocol (NTP) server,
and enable or disable daylight saving time.
In the Management menu on the bar on the top of the page, click
Time & Schedule
.
To configure and manage your schedules, click
Schedule
and refer to
Time Configuration
Time Zone:
Select your time zone from the drop-down menu.
Time:
Displays the current date and time of the router.
Daylight Saving:
Enable or disable daylight saving time.
Automatic Time Configuration
Update Time
Using an NTP
Server:
Enable or disable to allow an NTP server on the Internet to synchronize
the time and date with your router. If you enable this option, select
an NTP server from the drop-down menu. To configure the router's
time and date manually, disable this option and use the drop-down
menus that appear to input the time and date.
Click
Save
when you are done.
