34
Troubleshooting
2. The wireless client cannot access the Internet in the Infrastructure
mode.
•
Make sure the wireless client is associated and joined with the correct
router. To check this connection:
Right-click
on the
Local Area
Connection icon
in the taskbar> select
View Available Wireless
Networks
. The
Connect to Wireless Network
screen will appear.
Please make sure you have selected the correct available network, as
shown in the illustrations below.
•
Check that the
IP Address
assigned to the wireless adapter is within
the same
IP Address range
as the gateway.
Since the DI-614+ has
an IP Address of 192.168.0.1, wireless adapters must have an IP
Address in the same range, e.g., 192.168.0.x. Each device must
have a unique IP Address; no two devices may have the same IP
Address. The subnet mask must be the same for all the computers
on the network.)
To check the
IP Address
assigned to the wireless
adapter,
double-click
on the
Local Area Connection icon
in the
taskbar > select the
Support tab
and the
IP Address
will be
displayed. (Please refer to
Checking the IP Address
in the
Networking Basics
section of this manual.)
•
If it is necessary to assign a
Static IP Address
to the wireless
adapter, please refer to the appropriate section in
Networking
Basics
.
If you are entering a
DNS Server address
you must also
enter the
Default Gateway Address.
(Remember that if you have a
DHCP-capable router, you will not need to assign a Static IP Address.
See
Networking Basics: Assigning a Static IP Address.
)
Default
