2
Connecting the DWL-810+ to your
Ethernet-enabled device
A
.
First, connect the power adapter to the
receptor
at the back panel of the
DWL-810+ and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn
ON
to indicate proper operation.
B
.
Insert one end of an Ethernet cable (included) to the Ethernet port on the back
panel of the DWL-810+ and connect the other end to the Ethernet port located
on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop com-
puter, or network printer.) The LED light will blink when there is data tranfer
through the wireless connection. (Note: The Ethernet port on the DWL-810+
is Auto-MDI/MDIX. Meaning you can use a straight-through or crossover-
cable to the Ethernet Port.)
C
.
The antenna is used by the DWL-810+ to connect to other 802.11b wireless
devices.
A
.
Receptor for
Power Adapter
C
.
Antenna
Used to wirelessly
connect to 802.11b
networks.
B
.
LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
