55
2. The wireless client cannot access the Internet in the
Infrastructure mode.
Make sure the wireless client is associated and joined with the correct Access
Point. To check this connection:
Right-click
on the
Local Area Connection
icon
in the taskbar> select
View Available Wireless Networks
. The
Connect to
Wireless Network
screen will appear. Please make sure you have selected the
Troubleshooting
Check that the
IP Address
assigned to the wireless adapter is within
the same
IP Address range
as the access point and gateway.
(Since
the DI-524 has an IP Address of 192.168.0.1, wireless adapters must
have an IP Address in the same range, e.g., 192.168.0.x. Each device
must have a unique IP Address; no two devices may have the same IP
Address. The subnet mask must be the same for all the computers on
the network.)
To check the
IP Address
assigned to the wireless adapter,
double-click
on the
Local Area Connection icon
in the taskbar >
select the
Support tab
and the
IP Address
will be displayed.
(Please
refer to
Checking the IP Address
in the
Networking Basics
section of
this manual.)
If it is necessary to assign a
Static IP Address
to the wireless adapter,
please refer to the appropriate section in
Networking Basics
.
If you
are entering a
DNS Server address
you must also enter the
Default
Gateway Address
.
(Remember that if you have a DHCP-capable
router, you will not need to assign a Static IP Address. See
Networking
Basics: Assigning a Static IP Address.
)
default
