10
Please remember that
D-Link AirPlus Xtreme G
wireless devices are pre-
configured to connect together, right out of the box, with their default settings.
Getting Started
(continued)
For a typical wireless setup at home (as shown above), please do the following:
Setting up a Wireless Infrastructure Network
4
2
1
3
6
5
7
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router (
see the
Quick
Installation Guide
included with your router.
)
Install the D-Link
DWA-520
Wireless PCI Adapter into an
available PCI slot on your desktop computer.
(See the
Quick Installation Guide
included with the
DWA-520
.)
Install the D-Link
AirPlus Xtreme G
DWL-G650 Wireless PC Card Adapter
into a laptop computer.
(
See the
Quick Installation Guide
included with the DWL-G650.
)
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-530TX+) to the router also.
A RADIUS Server is optional. Connect a RADIUS Server to your network to use
all the features of WPA
/WPA2
. (Without a RADIUS Server you can still use the
WPA/WPA2
Pre-Shared Key
mode.) RADIUS Authentication can also be provided
by another
service provider over the Internet and remote to your network site.
TM
TM
TM