How To Set Up Wireless Network Security
Part 1: WEP
Part 2: WPA-PSK
Part 3-1: RADIUS Server Installation
Part 3-2: 802.1x-TLS
Part 3-3: WPA
You can secure your wireless connection using one of the methods described below. Choose the
one most suitable for your network. For simple networks WEP or WPA-PSK are most suitable,
complex networks with installed RADIUS services can use WPA.
Part 1: WEP
Step1: Setting up Access Point’s WEP encryption key.
1. Log into the Access Point using your WEB browser (e.g. Internet Explorer). Go to Wireless
configuration page (Home > Wireless).
Select the WEP option (Enable).
2. Select the “Key Mode” (ASCII or Hex).
ASCII (American Standard Code for Information Interchange): the standard for assigning numerical
values to the set of letters in the Roman alphabet and typographic characters.
HEX (Hexadecimal): numbers from 0 to 9 and letters from A to F.
3. Select WEP Key length.
64 bit: 5 ASCII or 10 Hex charcters
128 bit: 13 ASCII or 26 Hex characters
4. Select default key.
There are 4 WEP keys that can be used. Default key is the key number 1.
Select key 1, other three keys can be ignored.
5. Press “Apply” to complete your settings.
Summary of Contents for AirPlus Xtreme G DWL-2000AP
Page 3: ......
Page 5: ......
Page 16: ...16 Put this policy to be first please confirm the policy order...
