background image

8

L

K

J

J. 

SSID:

 

The Service Set Identifier is the name assigned to the wireless network. The 

factory SSID setting is set to default. Make changes here to match the SSID on existing 

Wireless Router or Access Point.

K. 

Wireless Mode:

 The factory setting 

is set to Infrastructure. Ad-Hoc mode is 

used for peer-to-peer networking.

L. 

Data Encryption:

 The default setting is 

set to Disable. The adapter supports WEP 

and AES when encryption is enabled.

N. 

Key Length:

 

When encryption is enabled, 

you will have the option to specify the level and 

key format of the encryption used. Select the 

appropriate Key Index: 1-4 and enter ACSII or 

hexadecimal digits in the appropriate field.

M. 

Authentication:

 

You can 

specify the authentication mode 

for the wireless network. The 

default setting is set to Open 

Authentication.

O.

 IEEE 802.1X:

 

When encryption is enabled, you will have the option to specify the level 

and key format of the encryption used. Select the appropriate Key Index: 1-4 and enter 

ACSII or hexadecimal digits in the appropriate field.

Appendix (Cont.)

M

N

O

Summary of Contents for AirPlus Xtreme G DWL-G650













Reviews: