15
Wireless Mode:
Authentication:
Keys 1-4:
Select the default key.
Data Encryption:
IP Settings:
Click on the pull-down menu; select from the
following options:
Infrastructure
- Connecting to the WLAN
using an access point. (This is the
default
setting).
Ad-Hoc
- Wireless mode used when
connecting directly to a computer equipped with a wireless adapter in a
Peer-to-Peer environment.
Choose one of the following modes:
Click
Apply
to save changes.
When you click
IP Settings
in the Configuration window, the pop-up screen
shown on the next page will appear. Configure the IP settings in that window.
Hexadecimal
digits consist of the numbers 0-9 and the letters A-F.
ASCII
(American Standard Code for Information Interchange)
is a code for
representing English letters as numbers from 0-127.
Using the Configuration Utility
(continued)
Configuration
Select
Enabled
or
Disabled.
Open Authentication
- The DWL-AG530 is visible to all devices on the
network.
Shared Authentication
- Allows communication only with other devices
with identical WEP settings.
WPA/WPA2*
- Select to enable WPA/WPA2. Click
Athentication Config
.
WPA-PSK/WPA2-PSK*
- Select to enable WPA-PSK/WPA2-PSK. Click
Authentication Config
.
*(See the following pages for more detailed configuration instructions.)
IEEE802.1x:
Enable 802.1x in this field.
(802.1x is automatically enabled when
WPA/WPA2
or
WPA-PSK/WPA2-PSK
is selected.)
SSID:
Service Set Identifier is a name that identifies a
wireless network. Access points and wireless
devices attempting to connect to a specific
WLAN (Wireless Local Area Network) must use
the same SSID. The default setting is
default
.
Key Length:
Select the key length and either ASCII or hexadecimal format.
