39
Check that the
Network Connection
for the wireless client is
configured properly. Select
AP (Infrastructure)
when connecting
to an access point and select
Ad-Hoc mode
when connecting
without an access point. Double-click on the
WLAN
icon
in the
taskbar > click on
Configuration
to change the settings for the
wireless adapter.
If
Security
is enabled, make sure that the correct encryption keys
are entered on both the DWL-AG530 and the access point. Double-
click on the
WLAN
icon in the taskbar > click
Encryption
. Check to
see that the key selected is set to the same key as other devices on
the network.
7. How can I avoid connection problems using the DWL-AG530?
Move the DWL-AG530 and the access point or wireless router into
the same room and then test the wireless connection.
Change the channel of the access point.
Move devices within the line of sight.
If
SuperA/G
is enabled, make sure that Turbo mode is enabled on
all Turbo mode compatible devices in your network, in order to
communicate.
Troubleshooting (continued)
*
Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.