29
DWL-7700AP User’s Manual
D-Link Systems, Inc.
DHCP Server
Control:
IP Assigned From:
Using the Configuration Menu
User Limit (0-64):
Link Integrate:
Ethernet Link
Status:
Set the
User Limit
in this field (0-64).
Select
Enabled
or
Disabled
. (When
Link Integrate
is
Enabled
,
and the Ethernet connection between the LAN and the AP is
disconnected, the wireless segment associated with the AP will also
be disconnected from the AP.)
This field displays the Ethernet Link Status.
Link Up
indicates that
there is an Ethernet LAN connection to the AP.
Dynamic Host Configuration Protocol
assigns dynamic IP
addresses to devices on the network. This protocol simplifies
network management and allows new wireless devices to receive
IP addresses automatically without the need to manually assign
new IP addresses.
Select
Enable
to allow the DWL-7700AP to function as a DHCP
server.
Advanced > DHCP Server > Dynamic Pool Settings
Input the first IP address available for assignment in your network.
