background image

802.11 a/b/g Access Point Command Line Interface Manual 

 

12

 

Security 

Del Command: 

Function 

Syntax 

del key 

Delete Encryption key 

del key [1-4] 

Get Command: 

Function 

Syntax 

get encryption 

Display (WEP) configuration state (enabled or disabled) get 

encryption 

get authentication 

Display Authentication Type 

get authentication 

get cipher 

Display Encryption cipher type 
Explanation: 

Response WEP for choosing WEP 
Response Auto for choosing WPA-Auto 
Resopnse AES for choosing WPA-AES 
Response TKIP for choosing WPA-TKIP 

get cipher 

get keysource 

Display Source Of Encryption Keys: 
Explanation: 

Response Flash Memory for static key 
Response Key Server for dynamic key 
Response mixed for mix static and dynamic key 

get keysource 

get key 

Display specified WEP encryption Key 

get key [1-4] 

get keyentrymethod 

Display Encryption Key Entry Method ASCII or Hexadecimal 

get keyentrymethod 

get groupkeyupdate 

Display WPA Group Key Update Interval (in Seconds) 

get groupkeyupdate 

get defaultkeyindex    

Display Active Key Index 

get defaultkeyindex    

get dot1xweptype 

Display 802.1x Wep Key Type 

get dot1xweptype 

get reauthperiod 

Display Manual Reauthentication Period 

get reauthperiod 

Set Command: 

Function 

Syntax 

set encryption 

Enable or Disable Encryption Mode 

set encryption [disable: enable] 

set authentication 

Set Authentication Type 

set authentication [open-system: shared-key: auto:8021x: WPA: 
WPA-PSK: WPA2: WPA2-PSK:WPA-AUTO:WAP2-AUTO-PSK] 

set cipher 

Set Cipher of wep, aes, tkip, or auto negotiate 

set cipher [wep:aes:tkip:auto] 

set groupkeyupdate 

Set Group Key Update Interval (in Seconds) for TKIP 

set groupkeyupdate <seconds> 

set key 

Used to set the specified wep key value and size 

set key [1-4] default 
set key [1-4] [40:104:128] < value> 

set keyentrymethod 

Select Between ASCII or HEX encryption key format 

set keyentrymethod [asciitext : hexadecimal] 

set keysource 

Select Source of Encryption Keys: static(flash), dynamic (server), mixed  set keysource [flash:server:mixed] 

set passphrase 

Modify Passphrase 

set passphrase <new passphrase> 

set dot1xweptype 

Set 802.1x Wep Key Type 

set dot1xweptype [static:

 

dynamic] 

set reauthperiod 

Set Manual Reauthentication Period 

set reauthperiod <xxxx> 
Explanation: <xxxx> is new priod. 

Summary of Contents for AirPremier DWL-7700AP































Reviews: