3
A.
Power on the DSA-3200.
B.
Connect an Ethernet cable from a
Public LAN
port to a switch or wireless access
point on your public network. The Public LAN LED will illuminate to indicate a
proper connection. If the Public LAN LED doesn’t light up, please check the
connections.
C.
Connect an Ethernet cable from a
Private LAN
port to an Ethernet port on your
private network’s switch. If properly connected, the Private LAN LED will illuminate.
(Note: For configuration purposes a computer can be connected directly to this
port using a standard Ethernet cable)
D.
Attach an Ethernet cable to the
WAN port
on the back panel of the DSA-3200.
Connect the other end to a router or directly to a broadband modem. The WAN
LED light will illuminate to indicate proper connection.
Connecting The DSA-3200 To Your Network
(continued)
When you have completed the steps in this
Quick Installation Guide,
your connected
network should look similar to this:
Summary of Contents for AirSpot DSA-3200
Page 11: ...11 Notes ...
