97
D-Link DIR-645 User Manual
Section 3 - Software Configuration
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory default settings.
Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
The following parameters will be available for configuration:
Save Settings To
Local Hard Drive:
Use this option to save the current router
configuration settings to a file on the hard disk of
the computer you are using. First, click the
Save
button. A file dialog will appear, allowing you to
select a location and file name for the settings.
Load Settings
From Local Hard
Drive:
Use this option to load previously saved router
configuration settings. First, use the
Browse
option
to find a previously saved file of configuration
settings. Then, click the
Restore Configuration
From File
button below to transfer those settings
to the router.
Restore To
Factory Default
Settings:
This option will restore all configuration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Reboot The
Device:
Click to reboot the router.
Clear Language
Pack:
If you previously installed a language pack and want to revert all the menus on the Router interface back to the default
language settings, click the
Clear
button.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
Summary of Contents for Amplifi DIR-645
Page 1: ......
