69
D-Link DIR-645 User Manual
Section 3 - Software Configuration
The following parameters will be available for configuration:
Checkbox:
Tick this option to enable the rule specified.
Name:
Enter a custom name for the rule being created
here. This name is used for identification.
Queue ID:
Select the appropriate priority requirement from
the drop-down menu that will be applied to this
rule. Option to choose from are Highest, Higher,
Normal, and Best Effort.
Protocol:
Select the protocol used for the application for
in the drop-down menu and it will automatically
place it in the Protocol field.
Local IP Range:
Enter the local IP range used here. This is the IP
range of you Local Area Network. The Router’s IP
cannot be included in this range.
Remote IP
Range:
Enter the remote IP range used here. This is the
IP range of the public network from the Internet
Port side. To apply this rule to any IP addresses
from the public side, enter the range 0.0.0.1 to
255.255.255.254.
Application Port:
Enter the application port number used here.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
traffic control and data priority manipulation.
Summary of Contents for Amplifi DIR-645
Page 1: ......
