background image

 

 

Indoor/ Outdoor Antenna Table: 

 

 

 

 

 

 

Model Name 

ANT24-0800 ANT24-0801 

ANT24-1200 

ANT24-1201 

ANT24-1400 

Signal directivity 

Omni-directional Directional  Directional Directional Directional 

Application range 

Outdoor Outdoor 

Indoor only 

Outdoor Outdoor 

Gain (Without cable loss) 

8dBi 8.5dBi 

12dBi 12dBi 14dBi 

Approximate Range at 1 Mbps * 

1Km under FCC 

800M under ETSI 

1.2Km under FCC 

800M under ETSI 

2Km under FCC 

1Km under ETSI 

2.5Km under FCC 

1Km under ETSI 

3Km under FCC 

1.5Km under ETSI 

Approximate Range at 11 Mbps * 

300M under FCC 

200M under ETSI 

350M under FCC 

200M under ETSI 

600M under FCC 

300M under ETSI 

750M under FCC 

300M under ETSI 

900M under FCC 

300M under ETSI 

Half power Beam width ** 

H360 V15 

H70 V70 

H80 V23 

H50 V50 

H30 V30 

Pigtail cable length 

NA 30cm 

NA 30cm 

30cm 

Antenna fixed connector 

N-jack N-jack 

SMA jack 

N-jack N-jack 

Surge protector for outdoors 

Included Included  --- 

Included Included 

Default Extension Cable Length 

50cm 3M 3M 50cm 

50cm 

Default mounting configuration 

Pole Wall/ 

pole 

Window/ wall 

Wall/ pole 

Wall/ pole 

Antenna-kit weight (kg) 

1.4Kg 1.04Kg 530g 380g 

2.35Kg 

Optional accessories 

 

Ultra low loss cable 

For ANT24-CB series 

Ultra low loss cable 

For ANT24-CB series 

Ultra low loss cable 

For ANT24-CB series 

Ultra low loss cable 

For ANT24-CB series 

Ultra low loss cable 

For ANT24-CB series 

 
*1.Extended range reference based on RF-Output Power 14dbm with default cable loss 
*2.The transmission distance range might depend on the two same spec antennas with default cable loss 
**HPBW: Half Power Beam Width. H : horizontal plane pattern, V : vertical plane pattern 

The actual Indoor range will be effected by users’ physical environment. The above figures are reference. 

 

Summary of Contents for ANT24 Series

























Reviews: