4
ANT24-0700 Install Guide
System Requirements
ANT24-Series
Regulations
2.4GHz~2.5GHz
5.15GHz~5.35GHz
5.47~5.725
5.75GHz~5.875GHz
point to multi-point
point to point
point to multi-point
36dBm
36dBm
point to point
30+6(antenna gain ) dBm
then above 30dBm, one dB output
power reduced, then 3dB antenna gain
increased
30+23(antenna gain)
then above 30dBm, one dB output power
reduced, then 3dB antenna gain increased
For outdoor use
X
FCC
23dBm
ETSI
20dBm ave.
23dBm peak.
23dBm
30dBm
X
Based
EIRP limitaton:
EIRP = Effective,Isotropic Radiated Power
= Device Output Power + Antenna Gain - Cable Loss
Model
Cable Type
Length
Interface
Cable loss (dB)
@ 2.4GHz
Cable loss(dB)
@5GHz
ANT24-CB03N
LMR400
3m
N plug to N jack
1
1.75
ANT24-CB06N
LMR400
6m
N plug to N jack
1.85
2.7
ANT24-CB09N
LMR400
9m
N plug to N jack
2.6
3.8
ANT24-ODU03M
LMR200
0.3m
RP N plug to N plug
0.6
1.15
ANT24-ODU1M
LMR400
1m
RP N plug to N plug
0.6
1.15
ANT24-ODU3M
LMR400
3m
RP N plug to N plug
1
1.75
ANT24-DLK3M
LMR200
3m
RP SMA plug to N plug
2
3.45
Note:
1. The loss value includes two connectors ( around 0.3~0.4dB @ 2.4GHz, 0.39~0.52dB@5GHz).
2. The longer cable you use, the more attenuation it causes, therefore, the extended range might be
shorten then a normal link with default cables.
3. To comply with EU regulation, please use longer cables which can cause enough attenuation value.
4. For more detail of connectors type, please refer to the appendix page.(P.34)
Cable Loss
Please add some sentences in P4 as below
“Use of high gain antennas need careful planning to conform with EU regulations and
extra consideration to avoid causing a potential health hazard, Please always seek
qualifi ed professional installer in all cases. “
“Outdoor Installations
Although D-Link offers a range of quality outdoor antennas, please note these devices
are designed only to be installed by a professional as there are EU regulations that need
to be considered. Cable lengths and quality will affect the antenna gain dramatically.”
